How To Get Spare Tire Out From Under Truck

One of the most important steps when replacing a flat tire is how to get the spare tire out of the torso.

Without being able to do this, you'll get stuck, and replacing information technology will be impossible.

In this commodity, we'll be showing the basic principle which can, more or less, be practical to every car. If you're not in the mood for reading, you can picket a video tutorial at the finish of the article or on our YouTube channel.

Also, if yous have a fix-a-flat system, then you don't take a spare tire and the problem is solved differently.

LOCATION OF THE SPARE TIRE

If you want to learn how to get the spare tire out of the torso, the first thing you have to know is where it'south located.

Different cars have dissimilar locations merely the most common location is:

Inside the trunk (boot)

location-of-spare-tire

In this case, the spare tire is unremarkably located underneath the trunk floorboard, in a compartment made especially for it.

Aslope the spare tire, at that place may be other compartments made for keeping the usual necessary things similar spare bulbs, first aid kits, towing cable maybe, and so on.

Most cars too accept a user-friendly plastic tool kit molded to fit inside the tire rim. The kit contains the car jack, tool wrench, tow hook, etc.

Underneath the trunk

spare-tire-underneath-car

If the spare tire isn't inside the trunk, this is the next place to wait.

When it's located under the trunk, it's commonly held in place by a hoist machinery which, when operated, lowers the tire down.

It's lowered past using the tire wrench in a combination with another lever. So, first, y'all assemble the lever and and so lower the tire down.

Other less common places

location-of-spare-tire-in-different-cars.

For cars that accept engines in the rear, the tire is usually located in the forepart compartment (front trunk).

The spare tire might as well be located inside the side console of the body. It can fifty-fifty be located in the engine bay.

Of form, for pick-ups and terrain vehicles, the tire may be fastened to the back door or even the hood (bonnet).

In this commodity, we'll be focusing on the first location (in the trunk) every bit information technology'southward the most common.

HOW TO GET THE SPARE TIRE OUT OF THE Trunk?

1. RAISE THE FLOORBOARD AND SECURE IT

how-to-raise-car-trunk-floorboard

On most floorboards, you'll observe a handle of some sort for pulling it up.

Also, there will likely be a system for keeping it in place so it doesn't fall on you when working around the spare tire.

Some boards are foldable or retractable and stay that way in place. Simply in this case, the handle also serves as a plastic hook. One side of the handle, when unlatched, reveals a hook.

It's intended to exist hooked on a user-friendly place on the auto. Here, it'southward on the upper role of the trunk.

trunk-floorboard-secured-with-plastic-hook-handle

Make sure to secure the floorboard properly so it doesn't fall on yous while you're taking out and returning the spare tire.

2. OPEN THE TOOL KIT LOCATED INSIDE THE SPARE TIRE (OPTIONAL)

spare-tire-toolbox-car-jack

If your auto doesn't have a tool kit inside the spare tire, then skip this step.

Just if it does, you'll have to remove information technology to gain access to the spare tire. The tool kit is commonly a plastic container molded specifically to concur the car jack, tire wrench, towing hook, or other useful things regarding a tire modify.

In this example, the tool kit has a plastic lid that you lot have to raise. After that, the car jack has to be removed for the next step to be possible.

Worth mentioning is that these tool kits were, in almost cases, logically made. When you lot have to change the tire, yous first have to accept out the car jack. Later that, you can accept out the whole tool kit for more practical usage. This also reduces the possibility of leaving tools behind when you lot're finished.

3. TAKE OFF THE Spiral Belongings BOTH THE SPARE TIRE AND TOOL KIT

how-to-get-spare-tire-out-of-trunk-taking-of-holding-screw

Even if in that location isn't whatever tool kit, the tire will probably be held in place with a spiral.

The point of the screw is to tighten the spare tire in identify then it doesn't move and thump while driving.

When you have a tool kit inside the rim, the screw normally holds both the tool kit and tire in place.

The spiral is hands recognized as information technology has, in most cases, a large plastic handle on peak of it, suitable for taking off past paw.

Grab the screw and turn counterclockwise. Information technology may have some fourth dimension to remove information technology because of the long thread.

4. TAKE OUT THE TOOL KIT

spare-tire-toolkit

Best put the tool kit aside for further usage if you need to modify the spare tire.

5. TAKE OUT THE SPARE TIRE

how-to-hold-spare-tire

You tin grab the spare tire at a place best suitable for yous. The only thing yous should have care of at this signal is to avoid dissentious whatever of the trunk interior (like the holders, plastic trim panels, or else).

Perhaps the best belongings place is the middle pigsty, where the lug nuts are supposed to exist. Here the balance is best and if the tire is smaller, you tin can practise it with one hand.

Another choice is to grab information technology past the side with two hands and and so pull information technology out.

Any yous cull, endeavour to pull out the spare tire in 1 sweep. From the compartment direct to the ground.

This is perhaps the heaviest function of learning how to become the spare tire out of the trunk. Especially if the spare tire is bigger and the torso is deeper. But with some average forcefulness, information technology can be done.

If you have problems replacing a spare tire, check out this article dedicated solely to that topic.

Once yous've finished changing, y'all may want to return the apartment tire dorsum into the compartment. If this is and so just use the aforementioned procedure just in reverse:

Render the spare tire back into the compartment
Put the tool kit (with tools inside) back into place
Insert the screw and tighten it. Make certain the tool kit fits properly into place so it doesn't rattle while driving.
If you accept to, return the car jack or other tools back into place
Lower the floorboard (if you need to, render the handle (hook) back into place).

Decision

As y'all've hopefully noticed, learning how to get the spare tire out of the torso is very easy.

It'due south considered bones and necessary knowledge for every serious driver.

One more piece of communication for the end: know your auto and its basics. The least a driver can exercise is to know where everything is stored in the car.

Having this cognition, not only for a spare tire but for other things like the spare bulbs, first assist kit, warning triangle, car jack, and else will enable yous to go yourself out of trouble faster and with more than ability.

Otherwise, y'all may get stuck in a serious situation because of a trivial affair.

Written by: Sibin Spasojevic

One-time motorcar technician, life-long car and DIY enthusiast, author for Despairrepair.com

HOW TO GET THE SPARE TIRE OUT OF THE TRUNK-YOUTUBE VIDEO